Merits
This heat hot air gun can help you finish desoldering work easily
Compact design, easy to use and carry.
LCD display for hot air temperature, convenient for operation.
Come with 9/4 different nozzles to meet different soldering needs.
The temperature and air volume can be easily and precisely adjusted.
High quality engine and heating elements which can supply natural and gentle wind.
Special soldering way without touching the solder joint which avoid the parts moving and thermal shock.
Suitable for most surface mount soldering and rework parts for desoldering various shielding box cover board.
Usage method:
Put the plug in the socket AC.220V/110V
Turn on the power.
According to soldered object size ,regulating the gas speed button to control the gas current, regulating the temperature button until the screen show the temperature you want.
When the work is over, turn the minimum. After blowing cold gas for about 30 seconds then turn off the power. This will prolong the heating element life.
If changing air collector first you will tune off the power and cool it.
Close hot air tool
Be sure to follow the following before closing the hot air tool
Adjust the temperature "heater" to the minimum gear
Adjust the air volume "air" to the maximum position
Hold on for 30 seconds, or wait for the temperature display to fall to 150 degrees Celsius, than you can turn off the turn off the power
没有评论:
发表评论