1000W 20A ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater 6219599979886 | eBay

1000W 20A ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater 6219599979886 | eBay

• Brand new 
• This section of induction heating using low-voltage DC power supply 12-48V 
• Maximum current 20A, maximum power 1000W
• Tested 53V power supply when working properly
• Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment
• Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient
• Inside diameter of the coil: 40mm 
• Height of the coil: 50mm 
• 24V input with no load current of 3A 
• 48V input with no load current of 6A 
• The higher the voltage, the greater the heating current when the same thing, the effect is better
• But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough
• It suits 12-36V power supply (not included) 
• The coil accept 40mm crucible

iMAX B6 2S 3S 4S-6S 3.7V 7.4V 11.1V Lipo Ni-MH LiFe RC Battery Balance Charger 860828663876 | eBay

iMAX B6 2S 3S 4S-6S 3.7V 7.4V 11.1V Lipo Ni-MH LiFe RC Battery Balance Charger 860828663876 | eBay

Microprocessor controlled delta-peak sensitivity
    Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable
    Large range of charge currents Store function, allows safe storage current
    Time limit function
    Input voltage monitoring. (Protects car batteries at the field)
    Data storage (Store up to 5 packs in memory)
    Battery break in and cycling
    Support new generation A123 system (LiFe) battery

iMax B6AC LiPo/Li-Ion/LiFe/NiMH/Nicad/PB Battery RC Balance Charger 80W | eBay

iMax B6AC LiPo/Li-Ion/LiFe/NiMH/Nicad/PB Battery RC Balance Charger 80W | eBay: Description
1. High-power and high-performance circuit
2. Microprocessor controlled
3. Maximen safety: Delta-peak sensitivity, Capacity limit, processing time limit, temprature limit, input power monitor
4. Monitoring the voltage of individual cell
5. Can charge Li-ion / LiPo / LiFe 1-6 cells, and Ni-Cd / NiMH 1 -15 cells
6. Dual Power, built-in AC adapter
7. Undefined Large range of charge currents
8. Store function, allows safe storage current, and data storage (Store up to 5 packs in memory)
9. Battery break in and cycling
10. Built-in temperature sensor
11. Separate voltage detector for balance charge mode.